SCAMP #457 build at Lake Chapala Mexico
Moderator: Moderator
-
- Regular Contributor
- Posts: 28
- Joined: Sun Feb 11, 2018 8:43 pm
Re: SCAMP #457 build at Lake Chapala Mexico
Very slow progress at the moment. However have reached the stage where the cockpit sole is in place and where I am about to put in the carlines. I think I will skip any photos as builders may shudder at what they see!
-
- Regular Contributor
- Posts: 28
- Joined: Sun Feb 11, 2018 8:43 pm
Re: SCAMP #457 build at Lake Chapala Mexico
Just saying that I am still at it. Got to the point where I am getting ready to glass the hull. Also am working on the mast as well. I have adopted the fact that I am building a boat and not a watch which has helped with a few hurdles along the way!
- wdscobie
- Recognized Old Salt
- Posts: 589
- Joined: Tue Oct 05, 2010 9:57 pm
- Location: Salish Sea
- Contact:
Re: SCAMP #457 build at Lake Chapala Mexico
Keep plugging away Steve!!
--
:: Dave Scobie
:: Liveaboard: Baba 30 DEJA VU
:: Owner M6'8" dingy
:: Former SWALLOW - https://saulboatswallow.wordpress.com
:: Former M17 SWEET PEA - https://m17-375.com
:: Former M15 SCRED - https://m15namedscred.wordpress.com/
:: Dave Scobie
:: Liveaboard: Baba 30 DEJA VU
:: Owner M6'8" dingy
:: Former SWALLOW - https://saulboatswallow.wordpress.com
:: Former M17 SWEET PEA - https://m17-375.com
:: Former M15 SCRED - https://m15namedscred.wordpress.com/
-
- Regular Contributor
- Posts: 28
- Joined: Sun Feb 11, 2018 8:43 pm
Re: SCAMP #457 build at Lake Chapala Mexico
Thanks mate!
-
- Regular Contributor
- Posts: 127
- Joined: Thu Sep 03, 2015 9:58 am
- Location: NWbyW Illinois
Re: SCAMP #457 build at Lake Chapala Mexico
Hey Steve,
Somethimes life gets in the way. I started building #337 about the same time as you began #457.
I have just finished gluing the skegs onto my boat. I am contemplating putting on a thickend coat of epoxy and microballons, say yellow mustard consistency, to fill the low spots, fiberglass holidays and the few places where I have lightly sanded into the edges of the fiberglass weave of the upper planks when feathering the overlaps. I fiberglassed all of the planks to try and combat dock rash and ended up with some holidays.
Cheers,
Greg.
Somethimes life gets in the way. I started building #337 about the same time as you began #457.
I have just finished gluing the skegs onto my boat. I am contemplating putting on a thickend coat of epoxy and microballons, say yellow mustard consistency, to fill the low spots, fiberglass holidays and the few places where I have lightly sanded into the edges of the fiberglass weave of the upper planks when feathering the overlaps. I fiberglassed all of the planks to try and combat dock rash and ended up with some holidays.
Cheers,
Greg.
-
- Regular Contributor
- Posts: 28
- Joined: Sun Feb 11, 2018 8:43 pm
Re: SCAMP #457 build at Lake Chapala Mexico
Hi Greg,
Glad to know I am in company with someone else plodding along. Sounds like you are a little ahead of me. Getting ready to glass the hull and then fill in some obvious dips in the hull. BTW am making my birdsmouth mast as well. Using a pvc pipe as the core.
All the best,
Steve
Glad to know I am in company with someone else plodding along. Sounds like you are a little ahead of me. Getting ready to glass the hull and then fill in some obvious dips in the hull. BTW am making my birdsmouth mast as well. Using a pvc pipe as the core.
All the best,
Steve
-
- Regular Contributor
- Posts: 127
- Joined: Thu Sep 03, 2015 9:58 am
- Location: NWbyW Illinois
Re: SCAMP #457 build at Lake Chapala Mexico
Hi Steve,
I wish you well on your mast build. I bought the spurce to build the mast and spars, but have not started on them. There are two voices on my shoulder regarding the mast. One says build a birdsmouth it would be challengeing and fun. The other is saying, you have had enough challenge just getting this far, keep it simple and laminate up a solid mast, the difference in weight would be that of a couple of the staves for a birdsmouth.
Cheers,
Greg.
I wish you well on your mast build. I bought the spurce to build the mast and spars, but have not started on them. There are two voices on my shoulder regarding the mast. One says build a birdsmouth it would be challengeing and fun. The other is saying, you have had enough challenge just getting this far, keep it simple and laminate up a solid mast, the difference in weight would be that of a couple of the staves for a birdsmouth.
Cheers,
Greg.
-
- Regular Contributor
- Posts: 28
- Joined: Sun Feb 11, 2018 8:43 pm
Re: SCAMP #457 build at Lake Chapala Mexico
Hey there Greg!
Interested to know what mast you have decided to go with.
My birdsmouth was a challenge for sure. Still not finished with getting it tapered. (I would have been better off with a solid wood mast)
Just curious about whether or not I am supposed to fibereglass all three strakes or just the garboard strake. Something tells me it is just the garboard one. Have not seen any mention of all 3 strakes in any info I have checked.
Got any idea?
Cheers,
Steve
Interested to know what mast you have decided to go with.
My birdsmouth was a challenge for sure. Still not finished with getting it tapered. (I would have been better off with a solid wood mast)
Just curious about whether or not I am supposed to fibereglass all three strakes or just the garboard strake. Something tells me it is just the garboard one. Have not seen any mention of all 3 strakes in any info I have checked.
Got any idea?
Cheers,
Steve
-
- Regular Contributor
- Posts: 28
- Joined: Sun Feb 11, 2018 8:43 pm
Re: SCAMP #457 build at Lake Chapala Mexico
Hi Greg,
Good idea to do all three like your doing anyway. Makes sense! Might just stay with the bottom, garboard and the ends for now before I run out of epoxy for the umpteenth time!
Cheers,
Steve
Good idea to do all three like your doing anyway. Makes sense! Might just stay with the bottom, garboard and the ends for now before I run out of epoxy for the umpteenth time!
Cheers,
Steve