SCAMP Forward Of Bulkhead #4
Moderator: Moderator
-
- New Contributor
- Posts: 6
- Joined: Fri Mar 22, 2019 8:32 am
SCAMP Forward Of Bulkhead #4
Is the area forward of bulkhead #4 on a SCAMP part of the water ballast tank?
-
- Regular Contributor
- Posts: 127
- Joined: Thu Sep 03, 2015 9:58 am
- Location: NWbyW Illinois
Re: SCAMP Forward Of Bulkhead #4
I don't have my plans handy, but I believe the area under the floor between bulkhead #3 and bulkhead #4 is not part of the water ballast tank.
The ballast tank is the area under the floor between bulkhead #4 and bulkhead #5. It is not expressly shown in the manual but it appears the best place to put the water ballast drain is near the centerboard pin. That way both can be accessed via a single inspection port.
The ballast tank is the area under the floor between bulkhead #4 and bulkhead #5. It is not expressly shown in the manual but it appears the best place to put the water ballast drain is near the centerboard pin. That way both can be accessed via a single inspection port.
-
- Major Contributor
- Posts: 292
- Joined: Tue Mar 18, 2014 1:03 pm
Re: SCAMP Forward Of Bulkhead #4
Greg is correct. Water ballast is between #4 & #5. It does not go forward of bulkhead #4.
Brent Butikofer
Scamp: Hagoth
https://buildinghagoth.wordpress.com
Scamp: Shackleton
https://buildingshackelton.wordpress.com
Pocketship:
https://idahopocketship.wordpress.com
Never Stop Learning or Exploring
Scamp: Hagoth
https://buildinghagoth.wordpress.com
Scamp: Shackleton
https://buildingshackelton.wordpress.com
Pocketship:
https://idahopocketship.wordpress.com
Never Stop Learning or Exploring